![]() Simultaneous maximum torque and maximum speed is NOT recommended.Motors should be operated at less than 30% of rated performance for the first hour of operation. ![]() Minimum oil viscosity should be 100 SUS.Filtration level per ISO Cleanliness Code level 18/3.Maximum operating temperature should not exceed 190☏ (90☌).Normal oil operating temperature should be 70° to 150☏ (20° to 60☌).Shop Spline Bore Jaw Coupling Hubs at and browse our extensive selection of industrial parts and supplies for all your MRO needs. This extends the operating life and provides better efficiency at continuous high pressures.įor optimal utilization of these motors, the following is recommended: Sae 6b Spline 0 Comments This Information Report along with SAE J500 and J501 is generally understood to be technically obsolete for the design of new applications. The Rolortorc™ gear set has rollers added to the outer ring which act as roller bearings, reducing friction and wear and increasing mechanical efficiency. Max Flow: 18.49 gpm (cont) / 22.45 gpm (int)Ĭlick here to view the manufacturer's catalog information on the BMER-2 Series of motors.Technical Specifications for BMER-2-200-FS-SW-S: The BMER-2 series of motors (upgraded from BMER-1) offers a Rolortorc™ gear set with high speed distribution flow and high pressure. Tapered roller bearings on the output shaft permit high axial and radial forces offering a smooth operation during low pressure start up and high pressure operation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |